Union Audio two.valve is an analogue 2-channel rotary mixer featuring valve circuitry, a 3-band isolator, high-pass filters, and a crossfader.
The analogue 2-channel rotary mixer Union Audio two.valve features integrated valve circuitry and a matte black metal chassis with rubber feet. The unit measures 23.0 x 28.3 x 10.0 cm and weighs 3.5 kg, with ventilation slots positioned on the top surface.
Channel Strips and Filters
Both identical channels are equipped with Alps rotary potentiometers, trim controls, ten-segment LED level meters, and switches for line and RIAA inputs. An aux control ranges from minus infinity to +10 dB with pre- or post-fader routing. The 3-band equaliser operates at 150 Hz, 1 kHz, and 2 kHz, offering cuts up to -20 dB and boosts up to +6 dB.
A dedicated two-pole high-pass filter spans from 15 Hz to 1.5 kHz. It uses variable-Q circuitry designed to adapt resonance automatically to the filter frequency, preventing excessive low-frequency boosting.
Master Section, Connectivity, and Crossfader
The master section houses two analogue VU meters with warm white backlighting that turns red above +3 VU. A 3-band master isolator operates at 200 Hz, 800 Hz, and 2 kHz, providing full cut and up to +6 dB boost. Monitoring controls include master, booth, headphone volume, split cue, and add mix. An Innofader crossfader with an adjustable curve sits on the bottom right and can be assigned to channels or bypassed using metal switches.
Rear connections include RCA sockets for line and RIAA phono per channel, alongside a single grounding post. Balanced XLR sockets serve as the master output, 6.3 mm jacks provide the booth output, and an RCA output is designated for recording. Outboard effects units connect via 6.3 mm jack sockets whose routing toggles between aux send/return and master insert via a selector switch. Headphone outputs are available in 3.5 mm and 6.3 mm formats. Technical specifications list a maximum output level of +27 dBu and a dynamic range of 116 dB.
Source: Amazona