Pioneer DJ DDJ-FLX10: Four Channels, Stems & DMX Output
· re:union Radio editorial · 2 min read
The Pioneer DJ DDJ-FLX10 separates vocals, drums, and instruments live, adding Mix Point Link and a dedicated DMX output for lighting control.
The Pioneer DJ DDJ-FLX10 is a 4-channel controller from AlphaTheta that splits tracks into vocals, drums, and instruments in real time using STEMS technology. The unit breaks down any loaded track right on the controller—no pre-prepared acapellas or instrumentals required—laying the groundwork for mashups straight from your live set.
At a glance
- 4-channel controller for rekordbox and Serato DJ Pro
- Real-time track separation into Vocals, Drums, and Inst (STEMS)
- Dedicated DMX output for lighting control without an external interface
- Enhanced On-Jog Display with four selectable view modes
Track Separation as a Core Tool
Via the Active Part and Part Iso functions, you control the volume or mute vocals, drums, and Inst independently for each deck. Part Instant Doubles lets you throw an isolated part of a track directly onto another deck, while FX Part Select targets Beat and Color FX at a specific stem. This lets you create mashups on the fly, without having to prep stems beforehand.
Mix Point Link and the On-Jog Display
With Mix Point Link, the DDJ-FLX10 introduces a function that automatically links transitions between tracks cleanly, keeping your hands free for effects and mashups. Right on the jog wheel, the On-Jog Display—evolved from the DDJ-1000—shows your choice of deck info, zoomed waveforms, the playing track's artwork, or a custom logo—including the 3-band waveform view otherwise reserved for the CDJ-3000.
Control Lighting Directly from the Controller
Unusual for a controller in this class: the DDJ-FLX10 sports its own DMX output (3-pin XLR). Compatible lighting fixtures can be hooked up directly without an extra DMX interface and controlled via rekordbox Lighting—either manually configured or automatically synced to the music.
Technical Specs
| Software | rekordbox, Serato DJ Pro |
|---|---|
| Frequency Response | 20 Hz – 20 kHz |
| Signal-to-Noise Ratio | 110 dB (USB), 94 dB (Line), 83 dB (Phono) |
| Inputs | 2× Line, 2× Line/Phono, 2× Mic (XLR/Jack) |
| Outputs | 2× Master (XLR/RCA), 1× Booth, 2× Headphones |
| USB | 2× USB-C |
| Other | 1× DMX Output (3-pin XLR) |
| Dimensions | 716 × 400.3 × 73.4 mm |
| Weight | 6.7 kg |
"You can add hypnotic lighting effects to your performances with the DDJ-FLX10, which includes a DMX output so you can connect lighting fixtures without the need for any other equipment."
FAQ
Do I need specific software for the Stems function?
The DDJ-FLX10 is built for rekordbox and Serato DJ Pro; the track separation into Vocals, Drums, and Inst runs directly via the controller's hardware controls.
How does the On-Jog Display differ from older Pioneer controllers?
It's an evolution of the DDJ-1000's display and offers four modes—including a 3-band waveform view otherwise exclusive to the CDJ-3000, plus an artwork view of the currently playing track.
If you want to take the stems concept further, you'll find it in a similar vein on the DDJ-FLX10 as a Stems Controller for Live Remixes. If you're after a standalone media player instead, check out the details on the Denon DJ SC6000 Prime.
Source: Pioneer DJ News, AlphaTheta Corporation.
